Engine Oil
0W-20
Full Synthetic
Capacity
5 qt
with filter
4.7 qt without filter
Oil Filter
15208-65F1E
Infiniti (OEM)
OEM spec: ILSAC GF-5
The 2020 Infiniti Q50 takes 0W-20 Full Synthetic with a total capacity of 5 quarts (filter included). You’ll need a 14mm socket for the drain plug, torqued to 34 Nm. The OEM oil filter is the Infiniti 15208-65F1E, with 1 compatible alternative listed below. Below you’ll find complete maintenance specs, fluid capacities, parts, and links to buy what you need.
⚑ QUICK DIY TIPS FOR THE 2020 INFINITI Q50
Torque your drain plug to 34 Nm (25 ft-lbs) to avoid leaks or stripped threads. Using the OEM filter (Infiniti 15208-65F1E) is recommended for warranty compliance. Always use 0W-20 Full Synthetic as specified by Infiniti — using the wrong viscosity can void your powertrain warranty. Check the maintenance schedule below for your next service interval. Viscosity 0W-20
Oil type Full Synthetic
Capacity (with filter) 5 qt
Capacity (w/o filter) 4.7 qt
OEM spec ILSAC GF-5
Filter Options
Infiniti 15208-65F1E OEM
Buy Ultra Synthetic oil filter
Drain Bolt & Hardware
Socket size 14 mm
Thread M12x1.25
Torque spec 34 Nm
Gasket Crush washer
V37 (3.0L VR30DDTT twin-turbo V6)
Type Nissan Matic S
Capacity 4 qt
Change interval 40,000 mi
DOT type DOT 4
Change interval 30,000 mi
Type Long Life
Color Blue
Capacity 6.5 qt
Change interval 120,000 mi
Differential Fluid (rear) Buy Type 75W-90 GL-5
Capacity 2 qt
Change interval 60,000 mi
Differential Fluid (rear) Buy Type 75W-90 GL-5
Capacity 2 qt
Change interval 60,000 mi
Differential Fluid (rear) Buy Type 75W-90 GL-5
Capacity 2 qt
Change interval 60,000 mi
Spark Plugs
Type Iridium
Gap 0.044
Quantity 4
Change interval 100,000 mi
Infiniti 22401-5CA1D OEM
Buy Tires
Size 245/60R18
Front pressure 33 PSI
Rear pressure 33 PSI
Air Filter
Infiniti 16546-30P00 OEM
Buy Cabin Air Filter
Infiniti 27277-4HH0A OEM
Buy Brake Pads
Infiniti D4M60-JL00A OEM
Buy Infiniti D1060-6HH0B OEM front
Buy Infiniti D1060-4GA0B OEM front
Buy Infiniti D4060-6HH0A OEM rear
Buy Wiper Blades
Infiniti 28890-4GF0B driver
Buy Infiniti 28890-4GF1A passenger
Buy 5k mi 7.5k mi 10k mi 15k mi 20k mi 30k mi 50k mi 60k mi 90k mi 100k mi
≈ every 6 months
▸ Change Engine Oil & Filterspark plug
14mm thread, aluminum head
18 ft-lb · 24.4 Nm
All categories STRUCTURE:BODY SEATS ENGINE AND ENGINE COOLING EQUIPMENT ELECTRICAL SYSTEM EQUIPMENT ADAPTIVE/MOBILITY WHEELS EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL EQUIPMENT:ELECTRICAL LANE DEPARTURE FORWARD COLLISION AVOIDANCE COMMUNICATION:MANUFACTURER TELEMATICS VISIBILITY LANE DEPARTURE: SENSING SYSTEM: OTHER POWER TRAIN VISIBILITY:WINDSHIELD EXTERIOR LIGHTING ELECTRICAL SYSTEM:SOFTWARE EQUIPMENT:ELECTRICAL:INFOTAINMENT:SOFTWARE LANE DEPARTURE: ASSIST FUEL SYSTEM, OTHER ELECTRICAL SYSTEM:BODY CONTROL MODULE/BCM EQUIPMENT:ELECTRICAL:INFOTAINMENT:BLUETOOTH/WIFI AIR BAGS:SENSOR:OCCUPANT CLASSIFICATION FUEL SYSTEM, GASOLINE ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER STRUCTURE SERVICE BRAKES POWER TRAIN:AXLE HUBS EQUIPMENT:ELECTRICAL:INFOTAINMENT VISIBILITY/WIPER FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING AIR BAGS ENGINE
ITB09-063C STRUCTURE:BODY 2026-04-13
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Infiniti by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
ITB19-024 SEATS 2019-09-12
DTC B00A0-00 STORED IF YOU CONFIRM DTC B00A0-00 (OCCUPANT DETECTION SENSOR UNIT) is stored And OCS zero point reset cannot be performed And The following screen will display: ACTION 1. Check the Occupant Classification System (OCS) control unit using the ODS Analysis tool software. ï· Refer to SERVICE PROCEDURE on the next page. HINT: âOCSâ may also be referred to as âODSâ. 2. Perform â75-zero RESETâ.
ITB19-028 ENGINE AND ENGINE COOLING 2019-09-25
Q50 AND Q60 WITH VR30DDTT (V6) ENGINE; ENGINE OIL DRAIN PLUG SERVICE INFORMATION SERVICE INFORMATION Whenever installing an engine oil drain plug on an APPLIED VEHICLE with a VR30DDTT (V6) engine, NEVER tighten the drain plug greater than its specified torque. Over-tightening may loosen the threaded insert in the oil pan (lower), causing an oil leak. ALWAYS replace the drain plug gasket after removing the drain plug, and then tighten the drain plug to the specified torque. ï· VR30DDTT (V6) engine oil drain plug torque (with new gasket): ï 2WD and AWD: 33.5 Nâ¢m (3.4 kg-m, 25 ft-lbs) ï· Avoid contact with the engine oil as it may be hot and cause burns. ï· Avoid prolonged or repeated contact with used engine oil as it may cause skin cancer. Try to avoid direct skin contact with used engine oil. If skin contact is made, wash with a suitable hand cleaner or soap as soon as possible.
Show all 129 TSBs(+126) Private Party
$19,332–$21,367
Dealer Retail
$22,385–$25,437
Estimated values assume average condition and mileage for vehicle age.
Source: estimated
Shop parts for the Infiniti Q50
Find oil, filters, and maintenance parts for the 2020 Infiniti Q50 on Amazon.
Shop parts ↗ Other 2020 Infiniti models
Have info for this vehicle?
Help fellow owners — submit specs from your owner's manual.
Submit specs ⓘ As an Amazon Associate, OilChangeDIY.com earns from qualifying purchases. Product links on this page may be affiliate links. See our affiliate disclosure for details. Always double-check specs against your owner's manual or official OEM documentation.