Engine Oil
0W-20
Full Synthetic
Capacity
4.2 qt
with filter
3.8 qt without filter
Oil Filter
26300-35505
Kia (OEM)
OEM spec: API SP
The 2019 Kia Forte takes 0W-20 Full Synthetic with a total capacity of 4.2 quarts (filter included). You’ll need a 17mm socket for the drain plug, torqued to 35 Nm. The OEM oil filter is the Kia 26300-35505, with 2 compatible alternatives listed below. Note: this vehicle has 2 active recalls — check the recalls section below. Below you’ll find complete maintenance specs, fluid capacities, parts, and links to buy what you need.
⚑ QUICK DIY TIPS FOR THE 2019 KIA FORTE
Torque your drain plug to 35 Nm (26 ft-lbs) to avoid leaks or stripped threads. Using the OEM filter (Kia 26300-35505) is recommended for warranty compliance. Always use 0W-20 Full Synthetic as specified by Kia — using the wrong viscosity can void your powertrain warranty. Check the maintenance schedule below for your next service interval. Viscosity 0W-20
Oil type Full Synthetic
Capacity (with filter) 4.2 qt
Capacity (w/o filter) 3.8 qt
OEM spec API SP
Filter Options
Premium FILTECH filter
Drain Bolt & Hardware
Socket size 17 mm
Thread M14x1.5
Torque spec 35 Nm
Gasket Crush washer
3rd gen BD (2.0L Smartstream I4)
Type SP-IV
Capacity 3.5 qt
Change interval 60,000 mi
DOT type DOT 3
Change interval 45,000 mi
Type Long Life
Color Green
Capacity 6.5 qt
Change interval 120,000 mi
Spark Plugs
Type Iridium
Gap 0.044
Quantity 4
Change interval 100,000 mi
Tires
Size 215/55R17
Front pressure 33 PSI
Rear pressure 33 PSI
Brake Pads
Kia 58101-S9A00 OEM front
Buy Wiper Blades
Bosch 18A passenger, 18"
Buy Rain-X 18-1 passenger, 18"
Buy 5k mi 7.5k mi 10k mi 15k mi 20k mi 30k mi 50k mi 60k mi 90k mi 100k mi
≈ every 6 months
▸ Change Engine Oil & Filterspark plug
14mm thread, aluminum head
18 ft-lb · 24.4 Nm
18V771000
Kia Motors America (Kia) is recalling certain 2019 Kia Forte vehicles equipped with LED headlights. The headlights may not have been manufactured with the correct low beam aiming. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
20V459000
Kia Motors America (Kia) is recalling certain 2019 Forte vehicles. The left front axle driveshaft may not have been heat-treated, which can cause it to break.
All categories EQUIPMENT ADAPTIVE/MOBILITY VISIBILITY:WINDSHIELD EQUIPMENT SUSPENSION POWER TRAIN SERVICE BRAKES, HYDRAULIC:BRAKE FLUID LOW WARNING: LAMP ENGINE AND ENGINE COOLING ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL ELECTRICAL SYSTEM STEERING UNKNOWN OR OTHER ELECTRICAL SYSTEM:SOFTWARE VISIBILITY ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM) ENGINE FUEL SYSTEM, GASOLINE FORWARD COLLISION AVOIDANCE VEHICLE SPEED CONTROL EXTERIOR LIGHTING POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM INTERIOR LIGHTING ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE SEATS STRUCTURE BACK OVER PREVENTION: WARNINGS STRUCTURE:BODY
PS579 EQUIPMENT ADAPTIVE/MOBILITY 2018-08-30
PITSTOP: FORTE (BDM) FRONT LICENSE PLATE BRACKET - This Pitstop provides information regarding front license plate installation on 2019MY~ Forte (BDm) vehicles. On Forte (BDm) vehicles without Smart Cruise Control (SCC), the front license plate can be installed directly onto the front bumper using the locating dimples (A) found on the front bumper to ensure alignment. Forte (BDm) vehicles equipped with Smart Cruise Control (SCC) will have a front radar and will include a license plate bracket located in the trunk upon delivery. ALWAYS use the license plate bracket for these vehicles. If the bracket is not used, the license plate will block the line of sight of the radar, which may result in warning messages and limitations of certain features.
PS299_R3 VISIBILITY:WINDSHIELD 2018-09-19
PITSTOP - CORRECT PROCEDURE FOR RAISING WINDSHIELD WIPERS - When servicing the windshield wipers on the listed vehicles below during PDI, make sure to use the procedure outlined below to raise the wiper arms to the fully vertical position in order to avoid damaging the paint on the rear edge of the hood. It is important to note that the wipers on these vehicles are recessed under the hood to provide better appearance and reduced wind noise characteristics. This procedure applies to both key start and SMK type ignition systems.
PS067_R1 EQUIPMENT 2018-10-19
PITSTOP: CYLINDER HEAD STEEL BALL INSPECTION AND INSTALLATION - This Pitstop provides information regarding the inspection and installation of the steel sealing ball on: * 3.3L & 3.8L Lambda engines for 2007-2008MY Sorento (BL), * 2.0L Nu engines for 2010-2019MY Soul (AM, PS), and * 1.8L & 2.0L Nu engines for 2010-2018MY Forte (TD, YD/YDm), 2019MY~ Forte (BDm). When replacing the cylinder heads on these engines, inspect the lubrication ports for installation of the steel sealing balls. Current replacement cylinder heads may not be equipped with the required steel balls. Identify and locate the nine (9) lubricant passages on 3.3L and 3.8L engines and three (3) on 1.8L and 2.0L engines and verify a steel ball is installed in each.
Show all 101 TSBs(+98) Private Party
$8,550–$9,450
Dealer Retail
$9,900–$11,250
Estimated values assume average condition and mileage for vehicle age.
Source: estimated
Shop parts for the Kia Forte
Find oil, filters, and maintenance parts for the 2019 Kia Forte on Amazon.
Shop parts ↗ Have info for this vehicle?
Help fellow owners — submit specs from your owner's manual.
Submit specs ⓘ As an Amazon Associate, OilChangeDIY.com earns from qualifying purchases. Product links on this page may be affiliate links. See our affiliate disclosure for details. Always double-check specs against your owner's manual or official OEM documentation.