2017 Nissan Altima

Front Member Welds - Quality Assurance Hold ***** Detailed Information ***** Nissan is placing a temporary Quality Assurance (QA) Hold on approximately 880 specific MY2017 Altima (L33) and 296 specific MY2017 Maxima (A36) vehicles. Some of these vehicles were originally placed on hold on October 14, 2016 and subsequently released for sale on October 21, 2016. After further engineering and design review, Nissan has decided to reverse this decision and place these vehicles on hold again. Nissan is continuing to study the issue and expects to have further direction by the end of November 2016. The Service Comm I.D. has been changed to help clarify which vehicles should be held until further notice. ***** What Dealers Should Do ***** 1. Verify if vehicles currently in dealer inventory are affected by this QA Hold using Service Comm I.D. PC502 Note: Dealers should continue to check new arriving inventory for QA Hold applicability. 2. Please do not sell or trade the specific 2017 Altima and Maxima vehicles in dealer inventory subject to this QA Hold. 3. No further action is necessary at this time. Nissan will provide an update by the end of November 2016. Note: If a vehicle previously held and sold, there is no need to notify the customer at this time. If necessary, Nissan will contact affected customers.

Front Member Welds - Quality Assurance Hold ***** Detailed Information ***** On October 14th, 2016, Nissan announced a Quality Assurance (QA) Hold on certain MY2017 Nissan Altima and Maxima vehicles identified in Service Comm as a precaution. Further investigation by Nissan confirmed the subject vehicles meet Nissan's standards and applicable regulations and require no further action. Accordingly, the Quality Assurance Hold is rescinded. IMPORTANT: Effective immediately, the Quality Assurance Hold is rescinded and the subject vehicles may be released for sale. ***** What Dealers Should Do ***** 1. Effective immediately, dealers may release for sale any vehicles in dealer inventory affected by this quality hold.

VOLUNTARY EMISSIONS SERVICE CAMPAIGN 2016-2017 ALTIMA ENGINE CONTROL MODULE REPROGRAM This bulletin applies only to vehicles equipped with 4-cylinder engines. INTRODUCTION Nissan is conducting a Voluntary Emissions Service Campaign on certain specific model year 2016 - 2017 Altima vehicles to reprogram the Engine Control Module (ECM). The reprogram will affect the operation of the grille shutters and will reduce under hood temperatures which, if not reprogrammed, could lead to a false Malfunction Indicator Lamp in some circumstances. The ECM will be reprogrammed at no charge to customers for parts or labor. IDENTIFICATION NUMBER Nissan has assigned identification number PC514 to this campaign. This number must appear on all communication and documentation of any nature dealing with this campaign. DEALER RESPONSIBILITY It is the dealer?' responsibility to check Service Comm for the campaign status on each vehicle falling within the range of this voluntary safety recall which for any reason enters the service department. This includes vehicles purchased from private parties or presented by transient (tourist) owners and vehicles in a dealer?s inventory. Federal law requires that new vehicles in dealer inventory which are the subject of a safety recall must be corrected prior to sale. Failure to do so can result in civil penalties by the National Highway Traffic Safety Administration. While federal law applies only to new vehicles, Nissan strongly encourages dealers to correct any used vehicles in their inventory before they are retailed.